Hello,
I was gifted a pretty nice RICOH ANALOG-DIGITAL watch case back # 122005 with a 122 module in it.
I need help setting the Analog time,  I can’t figure out how to adjust the hands.
I could also use help with the Alarm feature.

Any help woould be great.

Thanks

Not sure I recognize this one. Can we see a photo?
Adam

It is very similar to this:
http://www.digitalwatchlibrary.com/DWL/1work/ricoh-122/

Thanks

With the help of an Ebay Seller I have been able to solve the problem.

It seems that one needs to be aware of a few things about this watch :

When setting the analog hands there is no AM/PM portion of the day on the analogue section. It is not linked to the digital section date and has no date itself so it just goes round and round each 12 hours on its own.

There does seem to be a link from the digital section so that when the digital seconds hits 00 the analog minute hand moves forward to the next minute marker, which is pretty cool.

The alarm is based on the digital time section.

To set the Alarm - hold the left button down for five seconds to get the alarm mode. Press the right button once to access hour setting, left button to change the hours. Press the right button again to access minute setting, left button to change the minutes. Pressing the right button again causes the whole alarm time to flash - left button now toggles the alarm on/off. Right button a last time stops the flashing and left button a final time returns to the time/date display.

Thanks